Rf Display - HP 8920A User Manual

Rf communications test set

Hide thumbs Also See for 8920A:

Table of Contents

RF Display

This field selects the format for entering the RF Generator's and RF Analyzer's

frequencies:

When Freq is selected, you enter the RF Generator's and the RF Analyzer's

frequencies directly using the keypad or knob.

When Chan is selected, the RF Gen Freq and Tune Freq fields on all screens are

replaced by the RF Channel field, and only the channel number is entered and

Channel tuning eliminates the need to enter transmit and receive frequencies

directly into the Test Set. Once your radio's RF channel standard is selected, you

only have to enter the channel number to automatically set the RF Generator and

RF Analyzer to the correct frequencies.

Operating Considerations

When channel tuning is used, the RF Analyzer is set to manual tuning. The

field on the TX TEST, DUPLEX TEST, and RF ANALYZER screens is no

longer displayed. As a result, the

TX Frequency

field is set to

Table of Contents