Chapter 22, Tests Screen
TESTS (External Devices)
TESTS (External Devices)
Figure 140
The TESTS (External Devices) Screen
NOTE:
HP-IB Mode. The Mode field on the I/O CONFIGURE screen must be set to Control to
access connected HP-IB instruments.
538
S:\HP892XX\USRGUIDE\manual\testscrn.fb
The Tests Subsystem can only access external devices if they have been
configured. Most external devices use the HP-IB port for control. A serial printer
can be connected to the serial port for printing test results.
tstextdv.wmf