Connecting Power Cables - Huawei UPS5000-A-400 kVA User Manual

UPS5000-A-400 kVA
User Manual (60 kVA, PF=0.9)
Figure 3-37 Installing connecting kits
----End

3.3.2 Connecting Power Cables

Procedure
Step 1 Ground each UPS in a parallel system separately, and connect power cables and battery cables
by referring to the section "Single UPS Installation."
Step 2 Choose a parallel mode and connect cables to the parallel system based on site requirements.
The typical scenario is used as an example.
Issue 05 (2019-12-24) Copyright © Huawei Technologies Co., Ltd.
3 Installation
74