Huawei UPS5000-A-400 kVA User Manual page 102

UPS5000-A-400 kVA
User Manual (60 kVA, PF=0.9)
Item
IP address
Subnet mask
Gateway
MAC address
NAT mapping
Figure 4-13 RS485 communication settings
Item
Address
Baud rate
Parity mode
Issue 05 (2019-12-24)
Description
Specifies the IP address for the
Ethernet.
NOTICE
Ensure that the UPS IP address is
unique on the network segment.
Otherwise, the WebUI display
function may not function properly.
Specifies the subnet mask of the
Ethernet.
Specifies the Ethernet gateway.
Defines the physical address of
network equipment and is not
configurable.
NAT means network address
translation. If it is set to Disable,
Internet cannot access IP
addresses in the local area
network (LAN).
Description
This serial port address is
allocated by the user.
Select a baud rate to match the
user's network management
conditions onsite.
Verify the validity of RS485
communication characters. When
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Value Range
192.168.0.10 1.0.0.0–223.255.
255.255
255.255.255.0 0.0.0.0–255.255.
255.255
192.168.0.1 1.0.0.0–223.255.
255.255
- -
Disable Disable, Enable
Default Value Value Range
1 1–254
9600 9600, 19200,
115200
None None, Odd,
Even
94