Switching On Autostore (Int 1) - wtw pH/Oxi 340i Operating Manual

Operation
Setting the
save interval
44

4.6.2 Switching on AutoStore (Int 1)

The save interval (Int 1) determines the chronological interval between
automatic save processes. After the fixed interval has expired, the cur-
rent data record is transmitted to the internal storage and to the inter-
face.
The default setting for the save interval (Int 1) is OFF.
By this, the AutoStore function is switched off.
To switch the function on, set an interval (5 s, 10 s, 30 s, 1 min, 5 min,
10 min, 15 min, 30 min, 60 min):
1 Press the <RUN/ENTER> key and hold it down.
2 Press the <STO> key. Int 1 appears on the display.
TDS UpH O
S
1 n t 1
Time Baud
O
8 F
Day.Month No.
Year Ident
Tref25 Tref20 AutoCal DIN
LoBat nLF Lin Cal AutoCal TEC
3 Set the required interval between the saving procedures with
< > < > (Selection: 5 s, 10 s, 30 s, 1 min, 5 min, 10 min,
15 min, 30 min, 60 min).
4 Confirm with <RUN/ENTER>.
The number of free memory locations appears on the display.
TDS UpH O
S
4 9 9
1
Time Baud
F r e
Day.Month No.
Year Ident
Tref20
Tref25 AutoCal DIN
LoBat
nLF Lin Cal AutoCal TEC
5 Confirm with <RUN/ENTER>.
The prompt for the ID number appears on the display.
Sal
mV/pH
% mg/l
m S/
cm
mbar M cm
1/ cm Sal
F
°
C
/
% K
TP
° F
Auto Store
ARng
AR RCL
Sal
mV/pH
% mg/l
m S/
cm
mbar M cm
Sal
1/ cm
e
°
C
/
% K
TP
° F
Auto Store
ARng AR
RCL
pH/Oxi 340i