Specific Resistance; Salinity - wtw inoLab pH/Cond Level 1 Operating Manual

Operation

Specific resistance

102
4 Wait for a stable measured value.

4.4.2 Salinity

To measure the salinity, proceed as follows:
1 Perform the preparatory activities according to sec-
tion 4.4.
2 Immerse the conductivity measuring cell into the test
sample.
u d
3 Press the
the status line.
The salinity value of the sample appears on the dis-
play.
4 Wait for a stable measured value.
key repeatedly until Sal appears in