Xilinx Virtex-7 FPGA VC7203 Characterization Kit IBERT Getting Started Manual page 21

Hide thumbs Also See for Virtex-7 FPGA VC7203 Characterization Kit IBERT:

Table of Contents

X-Ref Target - Figure 1-17

VC7203 IBERT Getting Started Guide

UG847 (v4.0) November 6, 2013

To view the GTX transceiver operation, click Layout > Serial I/O Analyzer. In the

Links window, right-click and select Create Links... or press the Create Links button.

The Auto-detect links button can also be used to have the tools automatically scan for

any links that are connected and currently linked

Figure 1-17: Serial I/O Analyzer - Create Links...

If Create Links was selected, a pop up window displays. In this window you can link

any TX to RX GT transceivers. To create links, select the TX GT and RX GT from the

two lists, then press the Add (+) button. For this project, connect the following links:

MGT_X1Y8/TX to MGT_X1Y8/RX

MGT_X1Y9/TX to MGT_X1Y9/RX

MGT_X1Y10/TX to MGT_X1Y10/RX

MGT_X1Y11/TX to MGT_X1Y11/RX

www.xilinx.com

Running the GTX IBERT Demonstration

(Figure

1-17).

Send Feedback

Table of Contents

Need help?

Do you have a question about the Virtex-7 FPGA VC7203 Characterization Kit IBERT and is the answer not in the manual?