Chapter 1: VC7203 IBERT Getting Started Guide
7.
X-Ref Target - Figure 1-24
30
Send Feedback
A Customize IP window opens. In the Protocol Definition tab, change
LineRate (Gbps) to 12.5, then use the drop-down to change the Refclk (MHz) to
156.250. Do not change the other defaults
Figure 1-24: Customize IP - Protocol Definition
www.xilinx.com
(Figure
1-24).
VC7203 IBERT Getting Started Guide
UG847 (v4.0) November 6, 2013