Preparing Mmc/Sd For Boot; Creating Bootable Partition; Copying X-Loader - Texas Instruments OMAP35 Series User Manual

2.5. Preparing MMC/SD for boot

2.5.1. Creating bootable partition

To be able to boot from MMC/SD, there should be valid bootable partition on
the card.
Use
www.sysanalyser.com/sp27213.exe) and follow the steps below:
•
•
•
•
•
•

2.5.2. Copying x-loader

Copy the x-load.bin.ift to the MMC/SD card and rename it as MLO.
Once the U-Boot and Linux kernel are built, u-boot.bin, uImage and
ramdisk.gz should be copied to the card.
14
HP USB Disk Storage
Connect the card reader to the Windows machine where the formatting tool
has been installed.
Insert MMC/SD card into the card reader.
Launch the HP USB Disk Storage Format Tool.
Select FAT32 as File System.
Click on Start.
After formatting is done Click OK.
Platform Support Products
Preparing MMC/SD for boot
Format Tool (available
x-loader
from http://
Version 02.01.01.08