Introduction - Texas Instruments OMAP35 Series User Manual

9.1. Introduction

The camera ISP is a key component for imaging and video applications such
as video preview, video record, and still-image capture with or without digital
zooming.
The camera ISP provides the system interface and the processing capability
to connect RAW image-sensor modules and video decoders to the OMAP35x
device.
The capture module consists of the following interfaces:
•
•
Both these video inputs are connected to one TVP5146 decoder and the
application can select between these two inputs using standard V4L2 interface.
The following figure shows the basic block diagram of capture interface.
Figure 9.1. Capture Driver Component Overview
150
One S-video SD input in BT.656 format.
One Composite SD input in BT.656 format.
Note
Only one input can be captured or selected at any given point of time.
Platform Support Products
Capture Driver
Introduction
Version 02.01.01.08