Sample Applications; Introduction; Hardware Setup; Provided Sample Applications - Texas Instruments OMAP35 Series User Manual

9.5. Sample Applications

This chapter describes the sample application provided along with the package.
The binary and the source for these sample application can are available in the
Examples directory of the Release Package folder.

9.5.1. Introduction

Writing a capture application involves the following steps:
•
•
•
•
•

9.5.2. Hardware Setup

Following are the steps required to run the capture sample application:
•
•
•

9.5.3. Provided Sample Applications

Following are the list of capture sample application provided with the release:
•
Version 02.01.01.08
Opening the capture device.
Set the parameters of the device.
Allocate and initialize capture buffer
Receive video data from the device.
Close the device.
Connect the OMAP35x daughter card module containing the TVP5146
deocoder to the OMAP35x main board.
Connect a DVD player/camera generating a NTSC video signal to the S-
Video or Composite jack of the daughter card
Run the sample application after booting the kernel.
MMAP Loopback Application (saMmapLoopback.c):
This sample application using driver allocated buffers to capture video data
from any one of the active inputs and displays the video in the LCD using
display driver.
Platform Support Products
Capture Driver
Sample Applications
179