Configuring Linux Kernel; Build Configuration For Omap35X - Texas Instruments OMAP35 Series User Manual

4.2. Configuring Linux Kernel

Enter following command to make changes to default configuration. The
configuration options for various drivers will be described in the PSP datasheet
Following drivers are enabled in the default configuration:
•
•
•
•
•
•
•
•
•

4.2.1. Build configuration for OMAP35x

The default configuration included in the release contains all default values to
build Linux kernel for OMAP35x EVM. The specific processor type - OMAP3503,
OMAP3515, OMAP3525 and OMAP3530 - is detected at runtime.
This section illustrates these configuration items for reference.
To create default configuration:
To view configuration:
From the onscreen menu, select System Type:
Version 02.01.01.08
$ make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm menuconfig
Serial port
Mentor USB in Host mode
USB EHCI
Ethernet
MMC/SD
Video Display
Audio
NAND and OneNAND
Touchscreen
$ make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm
omap3_evm_defconfig
$ make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm menuconfig
Platform Support Products
Kernel

Configuring Linux Kernel

31