Usb Video - Texas Instruments OMAP35 Series User Manual

10.3.9.2. Resources
For testing USB Audio support we need any ALSA compliant audio player/capture
application. Kindly read the Audio driver section to get more inputs on this.

10.3.10. USB Video

10.3.10.1. Configuration
10.3.10.2. Resources
For testing USB Video support we need a user level application like mplayer to
stream video from an USB camera.
If you are using mplayer as the capture application, then you must export the
DISPLAY to a X server. Then, execute the following command:
192
[ ] Use System DMA for Rx endpoints
[*] Enable debugging messages
Device Drivers --->
Multimedia devices --->
*** Multimedia core support ***
<*> Video for Linux
[*] Enable Video for Linux API 1 (DEPRICATED)
[*] Enable Video for Linux API 1 (compatible) layer
*** Multimedia Drivers ***
[*] Video capture adapters --->
[*] V4L USB devices --->
<*> USB Video Class (UVC)
USB Support --->
<*> Support for Host-side USB
*** Miscellaneous USB options ***
[*] USB device filesystem
[*] USB device class-devices (DEPRECATED)
*** USB Host Controller Drivers ***
<*> Inventra Highspeed Dual Role Controller (TI, ...)
*** OMAP 343x high speed USB support ***
Driver Mode (USB Host) --->
[ ] Disable DMA (always use PIO)
[ ] Use System DMA for Rx endpoints
[*] Enable debugging messages
mplayer tv:// -tv driver=v4l2:width=320:height=240
Platform Support Products
USB Driver
USB Video
Version 02.01.01.08