2.2. Compiling X-Loader
Change to the base of the X-Loader directory.
Remove the intermediate files generated during build. This step is not necessary
when building for the first time.
Choose the configuration for OMAP3 EVM.
Initiate the build.
On successful completion, file x-load.bin will be created in the current
directory.
Version 02.01.01.08
$ cd ./x-load
$ make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm distclean
$ make
CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm omap3evm_config
$ make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm
Platform Support Products
x-loader
Compiling X-Loader
11