BALZER FIELD FLOATER 6 User Manual page 75

WEIGH SYSTEM PROGRAMMING
Scale Indicator Programming
If at any time you are accessing a menu location and are making a change to that setting which is either incorrectly being
entered or shouldn't be changed, press the Power button
current menu setting being accessed
Menu System Selection
The following steps will allow you to select which menu system you want to access:
Step
Access Menu system
Enter menu system code
Continue to selected menu system
Main Menu System
The following options are accessible through the main menu system:
Display
LCD Display Backlight Sets the backlight mode for the LCD display The red oval above the
Set Display Backlight
To set the scale indicator's Display Backlight see "Set Display Backlight" on Page 65 in Host Indicator Programming
Set Weighing Units
To set the scale indicator's Weighing Units see "Set Weighing Units" on Page 65 in Host Indicator Programming
Adjust Average Rate
To set the scale indicator's Average Rate see "Adjust Average Rate" on Page 65 in Host Indicator Programming
Field Floater 6 Grain Cart User Manual
Button
Function
Not used with Grain
Carts
display is a light sensor
Unit of Weight Sets the weighing unit between pounds and kilograms Changing units on
the Host Indicator will also change the units on the Scale Indicator
Average Rate The rate at which the output of the load cells is read by the Scale Indicator
This is in 1/4 second increments Changing the rate on the Host Indicator
will also change the rate on the Scale Indicator
Auto Off Amount of time (in minutes) before the weigh system turns off from
inactivity
Hold Enable Activates or deactivates the capability of locking the currently displayed
weight
Print Baud Rate The rate the RS232 output occurs This must match the rate of the device
attached to the RS232 port
This will turn the unit off without making any changes to the
Entry Option
The default selection is for the main menu
Enter 477 to access the Calibration menu
Definition
Display
71