BALZER FIELD FLOATER 6 User Manual page 29

OPERATION
Joystick Control System (Continued)
The grain doors inside the grain cart are controlled by the Open and Close buttons on the top of the joystick (Figure 24) With
each press of the Open switch, the grain doors open at 20% increments With each increment, a light on the top of the joystick
will illuminate to show how far the grain doors have opened This gives you full control over the discharge rate of the grain cart
When the Close button is pressed, the grain doors will return to their fully closed position The Closing light on the joystick will
illuminate while the doors are closing and will turn off when the doors are fully closed
Do not open the grain doors before engaging the auger system! This could cause the grain to overload the horizontal auger
and lock it into place which could cause damage to the grain cart
WARNING
To change the pitch of the discharge spout, move the joystick forward or backward (Figure 25) Moving the joystick forward
increases the pitch of the discharge spout and pulling the joystick backward decreases the pitch of the discharge spout
To change the rotation of the discharge spout, move the joystick to the left or right (Figure 26) The rotation of the discharge
spout will also turn to the left or right
Visually become aware of all the features and switches of the joystick Failure to become familiar with the joystick before
operating the grain cart may lead to personal injury or damage to the grain cart and other equipment and/or structures
Field Floater 6 Grain Cart User Manual
Opening the grain doors before engaging the auger
system may overload the augers resulting in the
augers being locked in place and not able to operate.
FIGURE 25
FIGURE 26
25