Table of Contents
Advertisement
Host Indicator Programming (Continued)
Set Auto Power Off for Host Indicator
The following steps will set the amount of time with no activity to the indicator before it turns itself off NOTE: THE INDICATOR
WILL NOT AUTOMATICALLY TURN ON WHEN ACTIVITY RESUMES
Step
Set Auto Off time delay
Select inactivity time delay
Use numeric keypad to enter time delay
Accept your time delay
Set Hold Enable for Host Indicator
The following steps will activate or deactivate the
load cells When a HOLD is activated, the display will alternate between the word HOLD and the displayed weight NOTE: THE
INDICATOR WILL NOT UPDATE OR RECORD NEW WEIGHT RECEIVED FROM LOAD CELLS
Step
Set Hold Enable
Select No or Yes
Accept your selection
Set Print Continuous for Data Output
The following steps will set the indicator for continuous data output to the RS232 port
Step
Set Print Continuous
Select No or Yes
Accept your selection
66
WEIGH SYSTEM PROGRAMMING
Button
Entry Option
The default selection is 000 - this will leave
the unit on until either manually turning off
with the power button or power is shut off to
the unit when the tractor is shut off
The scale indicator can accept a time delay
from 1 to 240 (in minutes)
button feature which will hold the current weight received from the
Button
Entry Option
The default selection is No - display will be
flashing
Switch to Yes to activate the Hold Enable
Button
Entry Option
The default selection is No - display will be
flashing
Switch to Yes to activate continuous data
output
Display
Display
Display
Field Floater 6 Grain Cart User Manual
Advertisement
Table of Contents
