Table of Contents
Advertisement
OPERATION
Grain Cart Weigh System Operation (Continued)
same time This will clear the saved TARE weight and return the scale to displaying only the GROSS weight
The
will enter the different menus to change the settings to your desired configuration See "Weigh System Programming"
on Page 57
The
is only used for the arrow function in this application
The
cycles the display between the GROSS weight and the NET weight when the TARE weight has been set
The
adds the currently displayed weight to the accumulated total for the selected memory location The weigh system
is capable of 99 separate memory locations You can set the memory locations to represent different field locations, different
grain crops, different seed varieties, etc See "Using Memory Locations" on Page 58
The
will flash the name of the last memory location used on the display To switch memory locations, press the up or
down arrow to change by increments of one or the left or right arrow to change by increments of ten Then press the RM button
again to display the accumulated data for that location
Quick Start Up and Use
On the host indicator, press the
34) Once the self test is complete, the indicator will display the current weight being applied to all load cells
If the grain cart is empty, zero the scale so only the weight of the grain in the cart will be displayed when loading the grain cart
To zero the scale, press and hold the
NET weight, the gross weight will zero and the indicator will show a NET weight negative number This negative number is the
GROSS weight (zero) less the TARE weight
Host Indicator Power Up
Button
Screen
Press
Display
GROSS
TOTAL
GROSS
Field Floater 6 Grain Cart User Manual
to turn on both indicators Both indicators will cycle through a start-up self test (Figure
key for two seconds (Figure 35) If a tare weight is set and the indicator is showing
FIGURE 34
Description
Displays the last memory
location used
Displays the memory
location name
Displays memory location
total accumulations If
the location is empty, the
display will show CLR
Displays accumulated
weight of memory
location
Current weight applied to
all load cells
Scale Indicator Power Up
Button
Screen
Press
Display
TARE
NET
GROSS
TOTAL
GROSS
Description
Current weight applied to
all load cells
31
Advertisement
Table of Contents
