Table of Contents
Advertisement
Host Indicator Programming (Continued)
Set Time and Date
The following steps will set the time and date for your indicators The system does not automatically change for Daylight
Savings Time
Step
Set Time and Date
Select to change time and date
To select Yes or No
Enter 2-digit year
To accept year as entered and move to
Month
To accept month as entered and move to
day
To accept day as entered and move to hour
of the day
To accept the hour of the day as entered
and move to minutes of the hour
To accept the minutes of the hour and move
to AM or PM
To change between AM or PM
To accept AM/PM setting and finish setting
the time and date
64
WEIGH SYSTEM PROGRAMMING
Button
Entry Option
The default selection is for leaving the time
and date as last set - display will be flashing
Switch display selection to Yes to change
the time and date - display will be flashing
If No is selected, this will move to the next
option in the menu list If Yes is selected,
display will change
Default is current year when unit initially set
up Enter 10-99 for years 2010 to 2099
Default is current month when unit initially
set up Enter 1-12 for month January to
December
Default is current day when unit initially set
up Enter 1-31 for day of month
Default is current hour when unit initially set
up Enter 1-12 for the hour
Default is current minute when unit initially
set up Enter 0-59 for the minutes past the
hour
Default is current AM/PM when unit initially
set up - display will be flashing
Switch display selection between AM and
PM - display will be flashing
Display will show Lost indicating the
previously stored information has been
changed
Display
Field Floater 6 Grain Cart User Manual
Advertisement
Table of Contents
