BALZER FIELD FLOATER 6 User Manual page 101

MAINTENANCE
Adjusting Track Tension (Continued)
2 . If the pressure is low, attach the quick connect couplings of the kit to the tractor's hydraulic system and pressurize the
system. The pressure control block is fitted with a pressure reducer, which is factory set, to maintain a pressure of 1400
psi .
3 . Slowly rotate the handle of the ball valve to be inline with the source hose (Figure 6). The pressure should rise to the
required 1400 psi (Figure 7) and the slack in the track should lift out.
4 . Close the ball valve.
5. Disconnect the source hydraulic lines from the tractor and the high pressure line from the accumulator .
6 . Replace the cap on the accumulator .
Adjusting Alignment
Proper alignment of the tracks is key to making the tracks last. If the tracks are not properly aligned, wear will be noticed on the
center guide lugs . Periodic checks for proper alignment are necessary to ensure safe operation and longer track life . Adjust the
left side and right side alignment bolts to correct alignment (Figure 8). A 1 1/2" wrench will be needed to adjust the alignment
bolts .
Tracks User Manual
Figure 6
Left Side
Alignment Bolt
Figure 8
Front of Unit
Anti-Rotation Clips
Figure 7
Right Side
Alignment Bolt
13