BALZER FIELD FLOATER 6 User Manual page 51

MAINTENANCE
Auger Drive System (Continued)
2 Check the drive chains for wear or damage and replace if necessary
3 Check the drive sprockets for wear or damage and replace if necessary
4 Check the auger gearbox oil level (Figure 69) The oil level should be about 1" to 2" below the vent/fill port Use 80W90
oil to fill gearbox if necessary
5 With an empty grain cart, open the front cleanout door on the vertical auger (Figure 70) and the bottom cleanout
doors on the horizontal auger (Figure 71) DO NOT INSERT ANY BODY PART OR TOOL INTO THE CLEANOUT
OPENINGS WHILE THIS UNIT IS CONNECTED TO A TRACTOR SERIOUS INJURY OR DAMAGE MAY OCCUR
DANGER
Field Floater 6 Grain Cart User Manual
FIGURE 70
FIGURE 69
Gearbox Vent/
Fill Port
DO NOT insert any body part or tool into the cleanout
openings while this unit is connected to a tractor.
Serious bodily injury or damage to the unit may occur!
FIGURE 71
47