BALZER FIELD FLOATER 6 User Manual page 72

Host Indicator Programming (Continued)
Set for Read Only Mode
The following steps will set the indicator for read only when another device is being used as the main host indicator
Step
Set Read Only mode
Select No or Yes
Accept your selection
Set Radio Enable
The following steps will set the indicator for wireless transmission of information to another compatible device
Step
Set Radio Enable
Select No or Yes
Accept your selection
Set Radio Channel
The following steps will set the indicator for wireless transmission on a specific channel All devices intended to communicate
with this indicator, must be on the same channel
Step
Set Radio Channel
Select Channel
Accept your selection
68
WEIGH SYSTEM PROGRAMMING
Button Entry Option
The default selection is No - display will be
flashing
Switch to Yes to set indicator to Read Only
Button Entry Option
The default selection is No - display will be
flashing
Switch to Yes to enable wireless
transmission
Button Entry Option
The default selection is 04 - display will be
flashing Use the numeric keypad to enter
the radio channel number (1-12)
Display
Display
Display
Field Floater 6 Grain Cart User Manual