BALZER FIELD FLOATER 6 User Manual page 43

MAINTENANCE
Spindle
PTO Shaft Lubrication Specifications
Lubricate all fittings (Figure 48) with a quality EP lithium grease meeting the NLGI #2 specifications and containing no more
than 1% molybdenum disulfide (ex Shell Super Duty or equivalent)
An EP lithium grease meeting the NLGI #2 specification and containing 3% molybdenum disulfide may be substituted for the
telescoping members only
Grease Recommendations
Cross and Bearing
Telescoping Shaft
Replacement parts must be lubricated at time of assembly Use the amount of grease listed above per location then follow lube
recommendations above for lubricating intervals
Lubrication
Lubricate with approved quality grease daily before starting work (Figure 50) Clean and grease the implement input driveline
before each prolonged period of non-use
Field Floater 6 Grain Cart User Manual
FIGURE 48
Rear Seal and Wheel Hub
Inner Bearing
FIGURE 49
Grease Point
Location
Outer Bearing Washer, Castle Nut,
and Locking Pin
Interval
Daily
Daily
Hub Gasket, Hub Cap,
and Bolts
Amount
1 Pump ea
4-8 Pumps
39