BALZER FIELD FLOATER 6 User Manual page 40

CAUTION
Daily and Before Start of Season
Before Starting Tractor
1 Check tires for damage and proper air pressure Repair or replace as needed Tire air pressure should be as listed in
Figure 45 below (for future reference check the box next to the tires on your machine) :
R1 - Lug
2 Torque all lug nuts to 450 ft/lbs (before first use after purchase, daily for the first five [5] days, before first use of season,
and after replacing tires)
3 Inspect suspension system for damage Repair or replace as needed
4 Inspect all hoses, connections, and reservoirs for leaks Repair or replace as needed
WARNING
5 Check all oil and fluid reservoirs for proper levels Fill to proper level with the oil or fluid approved for that system
Figure 46 shows the reservoir for the automatic oiler The automatic oiler uses SAE 30 motor oil
36
o 28L X 26 R3 - 10 Bolt, 13 3/16" Bolt Circle
o 28LR26 R3 - 10 Bolt, 13 3/16" Bolt Circle
o 30 5x32 R1 - 10 Bolt, 13 3/16" Bolt Circle
o 30 5x32 R3 - 10 Bolt, 13 3/16" Bolt Circle
o 30 5LR32 R1 - 10 Bolt, 13 3/16" Bolt Circle
o 30 5LR32 R3 - 10 Bolt, 13 3/16" Bolt Circle
o 850/50 30 5 - 10 Bolt, 13 3/16" Bolt Circle, 10 Ply
R3 - Diamond
o 900/60 32 R1 - 10 Bolt, 13 1/4" Bolt Circle
Before performing any maintenance on this machine,
turn off the tractor, remove the ignition key, and
relieve hydraulic pressure from the hydraulic systems
unless otherwise noted.
FIGURE 45
Tire Description
Using oils and fluids other than those approved and
specified for each system may result in damage to the
machine.
FIGURE 46
Reservoir
MAINTENANCE
Field Floater 6 Grain Cart User Manual
Tire Pressure
26 (180 kPa)
54 (372 kPa)
33 (228 kPa)
33 (228 kPa)
52 (359 kPa)
52 (359 kPa)
37 (256 kPa)
35 (241 kPa)