Table of Contents
Advertisement
WEIGH SYSTEM PROGRAMMING
Host Indicator Programming (Continued)
Set Radio Channel Network ID
The following steps will set the radio channel to transmit through a specific personal network ID This Network ID must be the
same on all devices to be wirelessly connected with this indicator
Step
Set Radio Channel Network ID
Select Channel
Accept your selection
Set Radio Channel Encryption Key
The following steps will set the indicator for encrypted wireless transmission This Encryption Key must be the same on
all devices to be wirelessly connected with this indicator NOTE: IF YOU FORGET THE ENCRYPTION KEY VALUE, YOU
WILL NOT BE ABLE TO CONNECT A RECEIVING DEVICE AND WILL HAVE TO RESET THE RADIO TO ITS DEFAULT
SETTINGS, THEN REPROGRAM THE RADIO CHANNEL
Step
Set Encryption Enable
Select No or Yes
If wanting to change to Yes
Accept your selection
Accept your encryption key
Reset Radio to Default Settings
The following steps will reset the indicator radio settings to their default values
Step
Reset Radio Defaults
Accept your selection
Field Floater 6 Grain Cart User Manual
Button
Entry Option
The default selection is 08000 - display will
be flashing Use the numeric keypad to
enter the personal network ID number (0-
65534)
Button
Entry Option
The default selection is no - display will be
flashing
If Yes, display will show the default
encryption key (000000) Use the numeric
keypad to enter the encryption key (0-
65534)
Button
Entry Option
The default selection is 0 - display will be
flashing Use the numeric keypad to enter
3 to reset the radio channels to their default
values
Display
Display
Display
69
Advertisement
Table of Contents
