2. Commissioning
2.2.2 Address assignment of the CP system
Please observe the following when using the CP sys-
tem on the Allen-Bradley RIO network:
Configuration
The CP system reacts on the RIO network like a
remote I/O block from Allen-Bradley. Note the different
configuration of the CP system in the RIO network:
CP system
last used string
0
1
2
3
PLEASE NOTE
With certain A-B controllers, it is necessary to
include the RIO slaves in a "scan" list.
Refer here to the A-B documentation.
CP FB8 9809a
A-B
Assigned address range
configuration
Quarter rack
32 inputs/outputs
Half rack
64 inputs/outputs
2-5