Setting The Rio Address And Baud Rate; Rio Address - Festo Compact Performance Series Programming And Diagnosis

1. Installation

1.3 Setting the RIO address and baud rate

1.3.1 RIO address

You can set the RIO address of the CP system with the
address selector switches.
The switches are numbered from 0...9. The arrow on
the address selector switches indicates the units or
tens figure of the set RIO address.
Fig. 1/2: Setting the baud rate and address
1-6
SAVE
0
1
2
3
Setting the baud rate
Setting the address
A A A A AA AA AA
CP FB8-E 9809a