1. Installation
The following connecting and display elements can be
found on the cover of the node.
Fig. 1/1: Display and connecting elements
PLEASE NOTE
The cover of the node is connected to the internal
boards by means of the cables for the operating
voltage connection. It cannot, therefore, be removed
completely.
CP FB8-E 9809a
&
%
Red LED: Operating status
!
Green LED: Fault on bus
"
Plug for RIO cable
#
Fuse for operating voltage to inputs
$
Operating voltage connection
%
String LED
&
CP connection
SAVE button
$
#
!
"
1-5