1. Installation
PLEASE NOTE
RIO addresses may only be assigned once per
Scanner module.
Setting the
Only clear assignment of the RIO addresses will guar-
address
antee a faultless NOMINAL/ACTUAL comparison during
the configuration run. We recommend that the RIO ad-
dresses be assigned in ascending order. You should
also adapt the RIO address assignments, if necessary,
to the machine structure of your system.
1. Switch off the operating voltage.
2. Assign an unused RIO address to the CP-System.
3. Use a screwdriver to set the arrow of the appropri-
Examples
Set
RIO address:
05
Set
RIO address:
38
Fig. 1/3: Addressing examples
CP FB8-E 9809a
ate address selector switch to the units or tens fig-
ure of the desired RIO address.
1-7