Testing The Valves - Festo Compact Performance Series Programming And Diagnosis

3. Diagnosis

3.2 Testing the valves

WARNING
Before starting the test, switch off the compressed
air supply to the valves.
You thereby avoid undesired or dangerous movements
of the actuators.
CAUTION
• This test function runs automatically within the
• None of the program-technical lockings or
Test routine During the test routine of the CP terminal, all the valves
will be switched on and off at 1 second intervals.
3-6
CP terminals. All the valves are switched on/off
cyclically.
further switching conditions will be taken into
account.
CP FB8 9809a