Preparing The Rio Network; Compiling The Configuration List - Festo Compact Performance Series Programming And Diagnosis

Hide thumbs Also See for Compact Performance Series:

Table of Contents

2. Commissioning

2.2 Preparing the RIO network

Configuration

Configuration of the CP system requires an accurate

list

procedure, as different configuration specifications are

sometimes necessary for each system due to the

modular structure. Before commissioning or programm-

ing you should therefore compile a configuration list of

all connected field bus slaves. Some A-B controllers

perform an automatic comparison between the NOMI-

NAL and ACTUAL configurations when they are

switched on. For the configuration it is important that:

• the specifications on configuration are as correct and

• the power supply to the PLC and to the RIO slaves

2-4

as complete as possible

is switched on at the same time or in the sequence

specified (see Chapter 2.3).

CP FB8 9809a

Table of Contents

Cp fieldbus node 8 Cp-fb8