XBee-PRO XTC antenna options
The following tables cover the antennas that are approved for use with the XBee-PRO XTC RF modules. If applicable, the tables show the required cable
loss between the device and the antenna.
Digi does not carry all of these antenna variants. Contact Digi Sales for available antennas.
Dipole antennas
All antenna part numbers followed by an asterisk (*) are not available from Digi. Consult with an antenna manufacturer for an equivalent option.
Part number
Type
1
A09-HSM-7
Straight half-wave
A09-HASM-675
Articulated half-wave
A09-HABMM-P5I
Swivel half wave with 5" pigtail
A09-HBMM-P5I
Straight half-wave with 6" pigtail
A09-HASM-7*
Articulated half-wave
A09-HRSM*
Right angle half-wave
A09-HG*
Glass mounted half-wave
A09-HATM*
Articulated half-wave
A09-H*
Half-wave dipole
Yagi antennas
All antenna part numbers followed by an asterisk (*) are not available from Digi. Consult with an antenna manufacturer for an equivalent option.
1
Installers should apply additional torque to screw on the antenna.
Connector
Gain
Required antenna cable loss
RPSMA
2.1 dBi
0.4 dB
RPSMA
2.1 dBi
0.4 dB
MMCX
2.1 dBi
0.4 dB
MMCX
2.1 dBi
0.4 dB
RPSMA
2.1 dBi
0.4 dB
RPSMA
2.1 dBi
0.4 dB
RPSMA
2.1 dBi
0.4 dB
RPTNC
2.1 dBi
0.4 dB
RPSMA
2.1 dBi
0.4 dB
Application
Fixed / mobile
Fixed / mobile
Fixed / mobile
Fixed / mobile
Fixed
Fixed
Fixed
Fixed
Fixed