Gd (Good Packets Received); Rc (Rssi For Channel); R# (Reset Number) - Digi XBee XTC User Manual

AT commands

GD (Good Packets Received)

This count increments when a device receives a good frame with a valid MAC header on the RF
interface. Received MAC ACK packets do not increment this counter. Once the number reaches
0xFFFF, it does not count further events.
To reset the counter to any 16-bit unsigned value, append a hexadecimal parameter to the command.
This value is volatile (the value does not persist in the device's memory after a power-up sequence).
Parameter range
0 - 0xFFFF
Default
0

RC (RSSI for channel)

Reads and reports the power level on a given channel.
Channel must be provided as a parameter for this command or an ERROR will be received. Channels
for this command are zero based (0 = Channel 1, 0x31 = Channel 50)
Parameter range
[read-only]: 40 - 110 [dBm]
Default
N/A

R# (Reset Number)

Provides the reason for the last device reset.
Parameter range
0-5
N/A
Parameter Description
0 Power up reset
2 Watchdog reset
3 Software reset
4 Reset line reset
5 Brownout reset
Default
0
XBee®/XBee-PRO XTend Compatible (XTC) DigiMesh RF Module User Guide
Diagnostic commands
44