AT commands
Default
7
NN (Network Delay Slots)
Set or read the maximum random number of network delay slots before rebroadcasting a network
packet.
Parameter range
1 - 0xA network delay slots
Default
3
Security commands
The following AT commands are security commands.
EE (Encryption Enable)
Enables or disables 128-bit Advanced Encryption Standard (AES) encryption.
Set this command parameter the same on all devices in a network.
Parameter range
0 - 1
Parameter
0
1
Default
0
KY (AES Encryption Key)
Sets the 128-bit network security key value that the device uses for encryption and decryption.
This command is write-only. If you attempt to read KY, the device returns an OK status.
Set this command parameter the same on all devices in a network.
Parameter range
128-bit value
Default
N/A
0
XBee®/XBee-PRO XTend Compatible (XTC) DigiMesh RF Module User Guide
Description
Encryption Disabled
Encryption Enabled
Security commands
52