Table of Contents
Advertisement
API frames
0x7E 0x00 0x16 0x10 0x01 0x00 0x7D 0x33 0xA2 0x00 0x40 0x0A 0x01 0x27 0xFF 0xFE 0x00
0x00 0x54 0x78 0x44 0x61 0x74 0x61 0x30 0x41 0x7D 0x33
The device calculates the checksum (on all non-escaped bytes) as [0xFF - (sum of all bytes from API
frame type through data payload)].
Explicit Addressing Command frame - 0x11
Description
This frame is similar to Transmit Request (0x10), but it also requires you to specify the application-
layer addressing fields: endpoints, cluster ID, and profile ID.
This frame causes the device to send payload data as an RF packet to a specific destination, using
specific source and destination endpoints, cluster ID, and profile ID.
For broadcast transmissions, set the 64-bit destination address to 0x000000000000FFFF .
n
For unicast transmissions, set the 64 bit address field to the address of the desired destination
n
node.
Set the reserved field to 0xFFFE.
n
Query the NP command to read the maximum number of payload bytes. For more information, see
Firmware
commands.
You can read the maximum number of payload bytes with the NP command.
Format
The following table provides the contents of the frame. For details on the frame structure, see
frame
specifications.
Frame data fields
Frame type
Frame ID
64-bit destination
address
Reserved
Source endpoint
Destination endpoint 16
Cluster ID
Profile ID
XBee®/XBee-PRO XTend Compatible (XTC) DigiMesh RF Module User Guide
Offset Description
3
0x11
Identifies the data frame for the host to correlate with a
4
subsequent ACK (0x8B). If set to 0, the device does not send a
response.
5-12
MSB first, LSB last. Set to the 64-bit address of the destination
device. Broadcast = 0x000000000000FFFF
13-14
Set to 0xFFFE.
15
Source endpoint for the transmission.
Destination endpoint for the transmission.
17-18
The Cluster ID that the host uses in the transmission.
19-20
The Profile ID that the host uses in the transmission.
Explicit Addressing Command frame - 0x11
API
72
Advertisement
Table of Contents
