Table of Contents
Advertisement
Modes
For an example of programming the device using AT Commands and descriptions of each configurable
parameter, see
AT
1. Send
CN (Exit Command Mode)
or:
2. If the device does not receive any valid AT commands within the time specified
(Command Mode
timeout is 10 seconds.
For an example of programming the device using AT Commands and descriptions of each configurable
parameter, see Commands.
XBee®/XBee-PRO XTend Compatible (XTC) DigiMesh RF Module User Guide
commands.
followed by a carriage return.
Timeout), it returns to Transparent or API mode. The default Command mode
Command mode
by CT
26
Advertisement
Table of Contents
