Table of Contents
Advertisement
API frames
Frame data fields
Broadcast radius
Transmission options 22
Data payload
Transmit Options bit field
Bit field:
Bit
Meaning
0
Disable ACK
1
Disable RD
2
NACK
3
Trace Route
4
Reserved
5
Reserved
6,7
Delivery method
Set all other bits to 0.
Example
The following example sends a data transmission to a device with:
64-bit address: 0x0013A200 01238400
n
Source endpoint: 0xE8
n
Destination endpoint: 0xE8
n
Cluster ID: 0x11
n
Profile ID: 0xC105
n
Payload: TxData
n
XBee®/XBee-PRO XTend Compatible (XTC) DigiMesh RF Module User Guide
Offset Description
Sets the maximum number of hops a broadcast transmission can
21
traverse. If set to 0, the transmission radius set to the network
maximum hops value.
If the broadcast radius exceeds the value of NH then the devices
use the value of NH as the radius. Only broadcast transmissions use
this parameter.
See the Transmit Options table below.
Up to NP bytes per packet. Sent to the destination device.
23-n
Description
Disable acknowledgments on all unicasts
Disable Route Discovery on all DigiMesh unicasts
Enable NACK messages on all DigiMesh API packets
Enable a Trace Route on all DigiMesh API packets
<set this bit to 0>
<set this bit to 0>
b'00 = <invalid option>
b'01 - Point-multipoint (0x40)
b'10 = Directed Broadcast (0x80)
b'11 = DigiMesh (0xC0)
Explicit Addressing Command frame - 0x11
73
Advertisement
Table of Contents
