Table of Contents
Advertisement
Revision history—90001480
Revision Date
B
May 2016
C
May 2018
D
June 2019 Added FCC publication 996369 related information.
E
November
2019
F
January
2020
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2018 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)
XBee®/XBee-PRO XTend Compatible (XTC) DigiMesh RF Module User Guide
Description
Removed Australian certification information. Added the UART data rate to
the performance specifications table. Added digital outputs to the physical
specifications table. Revised the cyclic sleep current numbers. Added the HS
command. Removed the indoor range specification.
Added note on range estimation. Changed IC to ISED.
Removed all references to the CONFIG line.
Added IFETEL certifications.
2
Advertisement
Table of Contents
