Telnet Control - A-Neuvideo ANI-H-KIT Instruction Manual

A NEUVIDEO

Telnet Control

Before attempting to use Telnet control, please ensure that both the unit and the PC/laptop are connected to the same active network.
To Access Telnet
Click START, type "cmd" in the search field and press ENTER.
Windows 7
Windows 10 1. Open "Control Panel".
2. Open "Programs and Features".
3. Select the "Turn Windows features on or off " option.
4. Check the "Telnet Client" box.
5. Click "OK". A box will appear that says "Windows Features" and
"Searching for required files". When complete, the Telnet client
should be installed in Windows.
In Mac OS X Click Go > Applications > Utilities > Terminal.
Once in the Command Line Interface (CLI) type "telnet" followed by the IP address of the unit (and the port number if it is non-standard)
and then hit "Enter". This will connect us to the unit we wish to control. Type "help" to list the available commands. See below for
reference.
NOTE: The default IP address is 192.168.1.50. If the IP address is changed then the IP address required for Telnet access will also
change accordingly. Telnet support requires the use of a compatible HDBaseT Receiver with an Ethernet port.
™
13
TELNET CONTROL