Hdmi over hdbaset receiver w/ ir, rs-232, poh pse & lan receiver & 4k uhd+ hdmi/vga over hdbaset w/ signal event automation 1 gang wallplate switcher (28 pages)
Page 1
ANI-8PDU-24V 8-PORT 24V DC POWER MANAGER A-NeuVideo.com Frisco, Texas 75036 AUDIO / VIDEO MANUFACTURER...
Page 2
SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
We assume no responsibility for any PACKAGE CONTENTS infringements of patents or other rights of third parties which may • ANI-8PDU-24V 8-Port 24V DC Power Manager result from its use. • 24V/6.25A DC Power Adapter We assume no responsibility for any inaccuracies that may be •...
NEUVIDEO FEATURES & SPECIFICATIONS FEATURES • Power management system providing voltage-controlled current (24V) on each output • Battery backed up clock for scheduling power events • Integrated WebGUI for control and power analysis • Unit’s overall maximum power consumption is only 150 watts •...
NEUVIDEO OPERATION CONTROLS & FUNCTIONS FRONT PANEL RS-232: Connect directly to your PC/laptop using a 3.5mm mini-jack to 9-pin adapter to send RS-232 commands to control the unit. ISP/RESET: This button has multiple functions, see below. A. ISP MODE: Press and hold this button while powering the unit on to enter ISP mode. B.
Page 6
NEUVIDEO RS-232 Control & Telnet Control RS-232 Protocol UNIT CONTROLLING PC SERIAL PORT SETTINGS Assignment Assignment Baud Rate 19200 Data Bits Parity Bit None Stop Bits Flow Control None Telnet Control Before attempting to use Telnet control, please ensure that both the unit and the PC are connected to the same active networks. UNIT Windows 7 Click START, type “cmd”...
NEUVIDEO RS-232 & Telnet Commands RS-232 & Telnet Commands COMMAND DESCRIPTION & PARAMETERS Show the full command list. HELP 8 Show the full command list. Show a description of command N1. HELP N1 8 N1 = {Command} Display the current IP configuration. IPCFG 8 IPSTATIC N1 N2 N3 8 Set the full static IP configuration.
NEUVIDEO WebGUI Control Device Discovery Please obtain the “Device Discovery” software from your authorized dealer and save it in a directory where you can easily find it. Connect the unit and your PC/Laptop to the same active network and execute the “Device Discovery” software. Click on “Find Devices on Network” and a list of devices connected to the local network will show up indicating their current IP address.
Page 9
NEUVIDEO WebGUI Control WebGUI Overview • STATUS: This tab displays the current status of the various components of the unit in real-time. 1. Power In: Displays the voltage, current and wattage of the unit’s main power supply. 2. Power Out: Displays the voltage, current and wattage of each of the 8 individual power outputs.
Page 10
NEUVIDEO WebGUI Control WebGUI Overview • SCHEDULE: The Schedule tab provides multiple ways to automate and schedule the powering on and off of any of the (8) power ports on this unit. 1. Repeat Mode: Items in this section will execute at their set times on the selected days (Sunday through Saturday) every week as long as they are marked as “Active”.
Page 12
BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to A-NeuVideo, Inc. at the return address set forth on the Product’s packing label at your expense.