A-Neuvideo ANI-H-KIT Instruction Manual page 11

A NEUVIDEO
Switch Tab
• Freerun Mode: Enable or disable the video freerun function. When this is enabled, the selected freerun color will be displayed on the
screen if there is no live source on the selected input.
• Freerun Color: Select the color to display when freerun is active. Available choices are: Black, Red, Blue, and Colorbars.
3. Input: Rename either Input or modify the HDCP behavior (Input 2 only) by clicking on the Edit icon (
Click on "Save" to confirm and activate any changes made to a name. Changes made to the HDCP behavior are applied immediately.
• Apple Mode: Completely disables HDCP support on the input.
• Follow In: HDCP support follows the HDCP mode required by the connected source device.
• Follow Out: HDCP support follows the HDCP mode supported by the connected sink.
1. Output: Click on the main button to begin routing selection. Click on the Camera icon (
mute or unmute the output. Click the Edit icon (
2. Edit Output: This window provides options to rename the Output, enable auto switching, set
audio routing, and configure freerun.
• Output Name: Provides a way to change the name of the Output port. Click on "Save" to
confirm and activate any changes.
• Auto Mode: Enable or disable the auto input switching mode.
• Audio Route: Control the audio used when the HDMI input is active. Selecting "Bypass"
will use the HDMI signal's normal audio. Selecting "External" will use the analog stereo
audio.
This tab provides video/audio routing control as well as
control over HDCP behavior, freerun settings, and naming of
the Inputs and Output. To assign a new video route, please
click the "Output" button and then click on the button of the
preferred Input port to route. As you select each button they
will change their color to orange. The new route will become
active immediately and the routing information displayed on
the buttons will change accordingly.
) to modify additional Output settings.
9
WebGUI Control
) to open the editing window.
) to