Rs-232 Control Command Introduction; Communication Protocol - A-Neuvideo ANI-MINI601HD Instruction Manual

Note:
1: The letter inside the bracket [ ] is the variable code, which is changeable.
2: The bracket [ ] is not part of the command.
3: Any dot "." after the letters is part of the command.
Example 1:
Switch the Input 2 to the line out. RS-232 command: [2A1.]
Example 2:
Turn up the volume on line audio. RS-232 command: [603%]
Example 3:
Preset the MIC volume to "21" degree. RS-232 command: [521%]
Example 4:
Check the status of Zoom function [0608%]
To cycle thru the Zoom functions, send the command repeatedly [0608%][0608%]

COMMUNICATION PROTOCOL:

Command
(ASCII)
MUTE
0600%
UnMute
0601%
Audio turn up
0602%
Audio turn down
0603%
Lock the front panel button
0604%
Unlock the front panel button
0605%
Preset the volume. The XX is ranging from 00 to 99
01XX%
Preset the brightness. The XX is ranging from 00 to 99 Brightness: XX
02XX%
Preset the contrast. The XX is ranging from 00 to 99
03XX%
Preset the saturation. The XX is ranging from 00 to 99
04XX%
Preset the sharpness. The XX is ranging from 00 to 07 Sharpness: XX
05XX%
Auto-adjust the input parameter
0606%
Auto-adjust the color temperature
0607%
ZOOM the image, set the aspect ratio
0608%
OK, for OSD selection
0609%
Left of OSD
0610%
Right of OSD
0611%
Up of OSD
0612%
Down of OSD
0613%
Set the picture mode
0614%
Sound Mode
0615%
MENU of OSD
0616%
Command to reset to factory defaults
0617%
Switching to HDMI1 input
0620%
Switching to HDMI2 input
0621%
Switching to VGA input
0622%
Switching to YPbPr input
0623%
Switching to S-Video input
0624%
RS-232 PROTOCOL
Function Description
Feed back
(example) (ASCII)
Mute On
Mute Off
Volume: XX
Volume: XX
Panel Locked
Panel UnLocked
Volume: XX
Contrast: XX
Saturation: XX
Adjustment
Color Temp: XX
Aspect Ratio: XX
OK
Left
Right
Up
Down
Picture Mode : XX
Sound Mode: XX
MENU
Factory reset
Source: HDMI 1
Source: HDMI 2
Source: VGA
Source: YPbPr
Source: SVIDEO
11