Webgui Control - A-Neuvideo ANI-H-KIT Instruction Manual

A NEUVIDEO
Device Discovery Softw are
Please obtain the "Device Discovery Software" from your authorized dealer and save it in a directory where you can easily find it.
Connect the unit and your PC/Laptop to the same active network and execute the "Device Discovery Software". Click on "Find
Devices on Network" and a list of devices connected to the local network will show up indicating their current IP address. (The unit's
default IP address is 192.168.1.50)
By clicking on one of the listed devices you will be presented with the network details of that particular device.
WebGUI Overview
After connecting to the WebGUI's address in a web browser,
the login screen will appear. Please enter the appropriate user
name and password then click "Submit" to log in.
NOTE: The default user name and password is "admin".
On the left side of the browser you will see the following menu
tabs where all primary functions of the unit (Switch, Automation,
EDID Settings and System Settings) are controllable via the built
in WebGUI. The individual functions will be introduced in the following sections.
• IP Mode: If you choose, you can alter the static IP network settings for the device, or
switch the unit into DHCP mode to automatically obtain proper network settings from a local
DHCP server. To switch to DHCP mode, please select DHCP from the IP mode drop-down,
then click "Save" followed by "Reboot".
• WebGUI Hotkey: Once you are satisfied with the network settings, you may use them to
connect via Telnet or WebGUI. The network information window provides a convenient link
to launch the WebGUI directly.
8

WebGUI Control

Clicking the red "Logout" tab will
automatically log the currently
connected user out of the WebGUI
and return to login page.