Features - A-Neuvideo ANI-H-KIT Instruction Manual

Hdmi over hdbaset receiver w/ ir, rs-232, poh pse & lan receiver & 4k uhd+ hdmi/vga over hdbaset w/ signal event automation 1 gang wallplate switcher
Table of Contents

Advertisement

A
NEUVIDEO

FEATURES

Wallplate
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 2.2 and HDCP 1.x compliant
• (1) HDMI input
• (1) VGA input with 3.5mm mini-jack audio input
• Wall plate is designed for US one-gang sized enclosures
• Supports HDMI input resolutions up to 4K@60Hz (4:4:4, 8-bit)
• Supports VGA input resolutions up to WUXGA (RB)
• Analog stereo audio may be embedded with VGA or DVI/HDMI sources
• HDBaseT
output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with automatic color space conversion of 4K@50/60Hz (4:4:4,
8-bit) or 4K@any (10/12-bit) sources
• Simultaneous transmission of uncompressed video, audio and data over a single 100M / 328 ft CAT5e/6/7 cable at 1080p@60 and
70M / 230 ft at 4K
• HDBaseT
feature support: HD Video and Audio, and 48V PoH (PD)
• Supports CEC bypass
• User activated information OSD
• Unit may be powered locally or via 48V PoH from a compatible HDBaseT
• Supports manual input selection or automatic input selection with hot plug detection
• Basic signal event automation (via RS-232 or CEC w/ compatible Receiver)
• USB port supports firmware update and powering of 5V/500mA devices
• Front panel LEDs indicate HDCP mode, input source, and power
• Controllable via a multi-function front panel button with OSD, or via
• WebGUI, Telnet, and RS-232 (w/ compatible Receiver only)
Receiver
• HDMI with 3D & 4K support, DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• Supports resolutions up to 4K@50/60Hz (4:2:0, 8-bit)
• Supports CEC bypass
• Simultaneous transmission of uncompressed video, audio and data over a single 100M / 328ft CAT5e/6/7 cable at 1080p60 and 70M
/ 230ft at 4K
• HDBaseT
feature support: HD Video and Audio, 100BaseT Ethernet, 48V PoH, and Control (bidirectional IR/RS-232 pass-through)
• Supports standard 48V PoH from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only)
NOTES:
• The 48V PoH function is designed to power compatible Transmitter units only. Non-PoH Transmitters will need their own power
supply. Other brands of Transmitter may not be compatible.
• The use of "Premium High Speed HDMI" cables is highly recommended for displaying 3D and 4K content and compatible display
equipment is required.
Receiver (PSE)
3
FEATURES

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ani-h-r4kAni-hv-wp4k

Table of Contents