Table of Contents
Advertisement
A
NEUVIDEO
CONTENTS
..........................................................................1
SYSTEM REQUIREMENTS .....................................................................2
FEATURES ................................................................................................3
SPECIFICATIONS .................................................................................... 4
OPERATION CONTROLS & FUNCTIONS ............................................. 5
IR CABLE PIN ASSIGNMENTS / RS-232 PROTOCOL ......................... 7
WEBGUI CONTROL .............................................................................. 8
TELNET CONTROL ............................................................................... 13
RS-232 & TELNET COMMANDS ............................................................. 14
CONNECTION DIAGRAM ................................................................... 19
WALLPLATE VIDEO / AUDIO .............................................................. 21
INTRODUCTION
The ANI-H-KIT transmitter and receiver set is a great solution for extending
uncompressed HD audio and video as well as Ethernet and control via
a single run of CAT5e/6/7 cable over distances of up to 100M. Multiple
data and control interfaces are provided, including IR, RS-232 and LAN
connections. This extender set complies with the advanced HDCP 2.2 and
HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI
1.x standards. The Transmitter (PD) is powered by 48V PoH (Power over
HDBaseT
) provided by the Receiver (PSE), allowing for greater flexibility
™
within different installation scenarios.
This Wallplate Switcher is an HDMI and VGA switch with audio embedding
and HDBaseT
output. The wallplate is designed for use with US single-
™
gang sized enclosures. This Transmitter can send uncompressed high-
definition video/audio over a single cable up to a distance of 100M at
1080p@60Hz. The HDMI input supports resolutions up to 4K@60Hz (4:4:4,
8-bit) and the VGA input supports resolutions up to WUXGA (RB). With the
use of the 3.5mm audio input, stereo audio may be embedded with VGA or
DVI sources as well. Despite HDBaseT
high bandwidth 4K UHD HDMI video sources, up to and including 4K@60Hz
(4:4:4, 8-bit), can be supported and will be automatically converted to 8-bit
color, or the 4:2:0 color space when necessary.
Signal management features such as automatic switching based
on input signal and hot plug detection enable convenient handsfree
operation. A multi-function button on the face of the unit provides access
to an information OSD as well as allowing manual input selection. When
paired with a compatible Receiver, additional functionality such as EDID
management, HDCP management and basic event automation (which
can send customized RS-232 or CEC commands to external devices
automatically) also becomes accessible.
This Transmitter (PD) may be powered locally or via 48V PoH from a
compatible HDBaseT
Receiver (PSE), which allows for greater flexibility
™
in installations. The unit can be controlled via the front panel button with
OSD. When paired with a compatible Receiver it may also be controlled via
WebGUI, Telnet, and RS-232 making it exceptionally versatile. This product
come with a 3 year warranty.
FEATURES .. 22
™
's 10.2Gbps bandwidth limitation,
™
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise - without the express written permission and consent.
© Copyright 2020. All Rights Reserved.
Version 1.0 MAY 2020
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
1
TABLE OF CONTENTS
Advertisement
Table of Contents
