A-Neuvideo ANI-H-KIT Instruction Manual page 13

A NEUVIDEO
EDID Settings Tab
• Upload: Click to upload a previously saved EDID file (*.bin) from the connected PC into the User EDID slot.
2. Sink EDID Download: Select and save the EDID from a connected display.
• Drop-down Menu: Select the sink to read an EDID from for download.
• Download: Click to download the EDID from the selected sink as a file (*.bin) to the connected PC.
3. EDID Mode: This dropdown controls how EDIDs are assigned to the unit's Inputs.
• All: Selecting this will allow the assignment of a single EDID to all Inputs simultaneously.
• Appoint: Selecting this allows for a different EDID to be assigned to each Input.
4. Set EDID Input Content: This section provides a way to set the EDID to use with the selected Input.
• IN 1/IN 2/All Input: Click the appropriate buttons to select the preferred Input(s) and open the EDID Source table for assigning an
EDID.
• EDID Source: Click the EDID to assign to the selected Input. Once the EDID has been selected, the change will be occur immediately.
The EDIDs available in the EDID Source table are:
EDID SOURCE
8bit/2D/PCM/1080p/2CH
8bit/2D/PCM/1080p/MCH
12bit/2D/PCM/4K2K@30/2CH
12bit/2D/PCM/4K2K@30/MCH
12bit/2D/PCM/4K2K@60/2CH
12bit/2D/PCM/4K2K@60/MCH
USER 1
USER 2
SINK A
This tab provides control over the EDID behavior of the unit.
There are six internal EDIDs, two customer uploaded EDIDs,
and one sink sourced EDID that can be assigned to each
input port individually. The sink EDID and both Customer
EDIDs are also available for download to the connected PC.
1. Customer EDID Settings: Manage the uploadable User
EDID content.
• Save Name: Type the preferred name for the User
EDID in the space provided then click "Save Name" to
confirm the change.
• Download: Click to download and save the current
User EDID as a file (*.bin) on the connected PC.
EDID CONTENT
1080p@60Hz, LPCM 2.0
1080p@60Hz, LPCM 7.1+Bitstream
4K@30Hz, LPCM 2.0
4K@30Hz, LPCM 7.1+Bitstream
4K@60Hz, LPCM 2.0
4K@60Hz, LPCM 7.1+Bitstream
The currently uploaded Customer EDID
The currently uploaded Customer EDID
EDID from the device on Output A
11
WebGUI Control