Dentsply Sirona
Operating Instructions CEREC Primemill
67 19 681 D3439
D3439.201.01.01.02 09.2019
Replacing the main fuses
7.7
WARNING
Electric shock
Disconnect the power plug at the unit end before replacing the fuses.
NOTE
Fuse type
Use only fuses of the same type in the fuse holder!
Fuse holder
A
Cover
B
Main switch
Fuses:
ü The power plug must be disconnected.
1. Use a screwdriver to carefully pry off the cover of the fuses on the
back side of the unit.
2. Pull out the fuse holder.
3. Replace the defective fuses.
4. Reinsert the fuse holder.
5. Close the cover.
7.7 Replacing the main fuses
C
Fuse holder
D
Fuse
T3.15H250V
Order no. 64 45 378
7 Service
57