Milling; Permitted Instrument Combinations; Preparations - Dentsply Sirona CEREC Primemill Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC Primemill
Instrument
Bur 2.5 ZrO2 CS
Bur 1.0 CS
Bur 0.5 CS
67 19 681 D3439
D3439.201.01.01.02 09.2019
6.3.1.2

Milling

For milling purposes, use the following instruments as well as the
appropriate torque wrench: When doing so, pay attention to the
connection geometry of the torque wrench.
REF Usage
6713940 Milling of zirconium oxide
(wet and dry)
6713932 All-purpose milling
(wet and dry)
6713924 All-purpose milling
(wet and dry)
6.3.1.3

Permitted instrument combinations

Depending on the materials to be processed and the process type used,
various instrument combinations are permitted. They are permanently
stored.
6.3.2

Preparations

ü Load or design a restoration (see Operator's Manual).
ü You are in the "MANUFACTURE" phase and have selected the
production unit, tested the settings, and positioned the restoration in
the block.
➢ Click the "Start" step.
Ä The production unit moves to the application position.
6.3 Machining process
Color Connection geometry of
the force transmission
Yellow Square
Black Triangular
Black
6 Operation
41