Installation And Startup; Transport And Unpacking; Disposal Of Packaging Materials - Dentsply Sirona CEREC Primemill Operating Instructions Manual

Hide thumbs Also See for CEREC Primemill:
Table of Contents

Advertisement

Dentsply Sirona
Operating Instructions CEREC Primemill
67 19 681 D3439
D3439.201.01.01.02    09.2019
5

Installation and startup

Transport and unpacking

5.1
All products from Dentsply Sirona are carefully checked prior to
shipment. Please perform an incoming inspection immediately after
delivery.
1. Check the delivery note to ensure that the consignment is complete.
2. Check whether the product shows any visible signs of damage.
NOTE
Damage during transport
If the product was damaged during transport, please contact your
carrying agent.
If return shipment is required, please use the original packaging for
shipment.
The unit must be drained before it is ever transported if it has been in
operation (see "Removing water from the unit  [→ 59]").
Transport without packaging
CAUTION
Damage to the unit or risk of injury during transport without packaging
There is a danger of the unit falling down if it is grasped by its plastic
housing.
➢ The unit should always be carried by two persons.
➢ Do not grasp the unit by its plastic housing.
➢ Always grasp the unit by its chassis next to its feet.

Disposal of packaging materials

5.2
The packaging must be disposed of in compliance with the relevant
national regulations. Please observe the regulations applicable in your
country.
5 Installation and startup
5.1 Transport and unpacking
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cerec primemill us

Table of Contents