Supplied Tools; Instruments; Calibration Pins; Torque Wrench - Dentsply Sirona CEREC Primemill Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC Primemill
Instrument
Bur 2.5 ZrO2 CS
Bur 1.0 CS
Bur 0.5 CS
Diamond 1.4 CS
Diamond 1.2 CS
Diamond 1.0 CS
Diamond 0.6 CS
Calibration pin
67 19 681 D3439
D3439.201.01.01.02 09.2019
5.4.2

Supplied tools

5.4.2.1

Instruments

The following instruments are available for milling and grinding
purposes. When replacing instruments, ensure the permitted instrument
combinations are used (see "Permitted instrument combinations
[→ 41]").
5.4.2.2

Calibration pins

The calibration pins are used when calibrating the instrument sets (see
"Calibrating the unit [→ 38]").
5.4.2.3

Torque wrench

To insert or replace the instruments or calibration pins, use the
appropriate torque wrench. When doing so, pay attention to the
connection geometry of the torque wrench.
REF Usage
6713940 Milling of zirconium ox-
ide
(wet and dry)
6713932 All-purpose milling
(wet and dry)
6713924 All-purpose milling
(wet and dry)
6714088 Grinding
6714070 Grinding
6714062 Grinding
6714054 Grinding
Calibration
5 Installation and startup
Color Connection geometry of
the force transmission
Yellow Square
Black Triangular
Black
White
White
White
White
Light blue
5.4 Commissioning
23